Teves leaking

Discussion of STOCK calipers, pads, rotors, fluids, lines, reservoirs, pedals and systems.

Re: Teves leaking

Postby oldray » Fri Jul 04, 2014 9:09 am

lincoln rookie wrote:One other thing,the part # does not appear to fit a Lincoln,only GM.


From one rookie to another,.... I think from surfing the net that some GM cars also used the Teves system, …..same parts, different box. :)

Lincoln rookie wrote:Someone has successfully used this switch on their Lincoln I assume?
:?:

Post by thunderjet » Wed Mar 05, 2014 2:04 pm I installed the part and the brakes are working fine again with no leaks.
User avatar
oldray
REGISTERED USER
 
Posts: 92
Joined: Sun Mar 30, 2014 12:34 pm
Location: Invermere, Rocky Mountains British Columbia, Canada

Re: Teves leaking

Postby CDW6212R » Fri Jul 04, 2014 2:15 pm

The system should be bled when anything is opened that allows fluid out, which can possibly let air in. But that switch hole will not cause much fluid or air transfer. It will not take much to bleed the system, minor job, and an excellent reason to get some new fluid into it.

Brake fluid should be discarded/flushed after a couple of years for optimum braking.
Don
1991 Red Special Edition, my 2nd SE, dead paint, DWS 255/45/17's on 95 Cobra wheels, and soon; DVD/Navi/backup camera, OBDII and the 347, before custom paint.
98 Mountaineer with Continental DWS 255/55/18's, big sway bars, custom brakes. Soon to be A4WD with XP8 bumpers and wing.

ImageImage
User avatar
CDW6212R
CLUB MEMBER
 
Posts: 5376
Joined: Wed Feb 09, 2011 11:57 pm
Location: Near Dollywood in TN

Re: Teves leaking

Postby lincoln rookie » Fri Jul 04, 2014 9:11 pm

has anyone changed the switch without pulling the whole unit out of the car please?
Thanks
User avatar
lincoln rookie
REGISTERED USER
 
Posts: 2
Joined: Fri Jul 04, 2014 7:45 am

Re: Teves leaking

Postby MrFixit » Wed Jul 09, 2014 12:51 pm

Yes, I have replaced 3 pressure switches without removing the unit
Image


89 Ebony Mark VII LSCR 5.0, AFR 165 heads, Vortec V3 supercharger, AOD
91 Electric Current Red LSC SE 351W, AFR heads, Paxton supercharger, TKO 5spd trans
86 Black LSC 393 stroker with 850cfm Demon carb, T5 trans
92 Deep Jewel Green Mark VII LSC
88 White Mark VII LSC


92 Deep Jewel Green Mark VII LSC SOLD
92 Deep Jewel Green Mark VII BB SOLD
92 Ebony Mark VII SOLD
96 Cordovan Metallic Towncar Diamond Anniversary Edition SOLD
88 White Mark VII LSC -sent to scrap yard
88 Tan Mark VII LSC - sent to scrap yard

SAWZALL FOOD:
89 RED LSC - http://thelincolnmarkviiclub.org/Gallery/album247
89 RED (Electric Current) LSC- http://thelincolnmarkviiclub.org/Gallery/album178
92 Deep Jewel Green LSC- http://thelincolnmarkviiclub.org/Gallery/album222
MrFixit
Chapter Coordinator
 
Posts: 256
Joined: Sun Dec 28, 2008 7:59 pm
Location: NJ

Re: Teves leaking

Postby thunderjet » Thu Nov 06, 2014 2:18 pm

LATE reply but yeah you can change the switch without removing the unit. It's actually not that hard to do. You will need to bleed the brakes.

So far so good. The AC Delco switch is working fine and still no leaks 9 months later.
Image
1988 Thunderbird LX: 306, Edelbrock Performer heads, Edelbrock Performer RPM intake, 70mm TB, 80mm PMAS slot MAF, 30lb injectors, Comp 266HR cam, FRPP 1.6 roller rockers, FRPP shorty headers, 2.5" dual exhaust, AOD with 2800 PI Stallion converter, 3.73 Traction-Lok.
Other rides: 2011 Focus in blue flame, 2012 Mustang 3.7 in grabber blue, 2017 Honda Accord EX-L V6
User avatar
thunderjet
REGISTERED USER
 
Posts: 392
Joined: Mon Nov 26, 2012 10:14 pm
Location: Chicago

Re: Teves leaking

Postby Falkon » Thu Nov 06, 2014 8:38 pm

The same type of Teves unit was used on some GM cars in the period. Buick Reatta for example. Hence a GM part.
User avatar
Falkon
CLUB MEMBER
 
Posts: 266
Joined: Sun Dec 22, 2013 2:49 am
Location: Wisconsin

Re: Teves leaking

Postby foytech » Tue Sep 12, 2017 11:09 pm

Is the switch that you purchased for a 1991 Lincoln Mark Vii? I am trying to locate part numbers to look for the correct one. I bought a brand new one last year due to a faulty switch, and apparently, it has failed and is leaking (according to the mechanic) Same type of leak.
User avatar
foytech
CLUB MEMBER
 
Posts: 30
Joined: Sat Jan 11, 2014 2:25 am

Re: Teves leaking

Postby robertbweltzien » Thu Sep 14, 2017 3:09 pm

A gallon of DOT 4 to flush every year!

Bob
Medicine, Biomedicine, Mechanics and MK VIIs
User avatar
robertbweltzien
CLUB MEMBER
 
Posts: 481
Joined: Tue Oct 16, 2012 4:51 pm
Location: Connecticut

Re: Teves leaking

Postby foytech » Sat Oct 07, 2017 4:23 pm

Hi All,

Just FYI, for those who are in California. I have found a company called invasion auto products. Located in Hollywood, CA. They rebuild any part of this system. They currently have mine, and the turn around is about 2 working days. I spent more time shipping from shop to shop rather than just have them look at it. I will update you with the cost of this service once its back in my hands.

Reff
User avatar
foytech
CLUB MEMBER
 
Posts: 30
Joined: Sat Jan 11, 2014 2:25 am

Previous

Return to Brakes

Who is online

Users browsing this forum: No registered users and 1 guest

cron