Door panel foam replacement?

Discussion of STOCK air conditioning, consoles, defoggers, defrosters, door trims, heating, HVAC, safety air bags, seats, windows and systems.

Door panel foam replacement?

Postby Miah » Sun Mar 19, 2017 8:36 pm

Anyone know where I can source replacement door panel foams? PO tore the crap out of both sides & I'd like something...oem-ish even if it's not an exact match.
User avatar
Miah
REGISTERED USER
 
Posts: 17
Joined: Mon Feb 06, 2017 7:58 am
Location: MO, USA

Re: Door panel foam replacement?

Postby WHITEOXLSC » Mon Mar 20, 2017 9:23 am

I managed to get a good set from the local Pick N Pull yard. I agree most people don't give a s*&T when it comes to removing these, all it takes is some patience. Anyway I would try Tom Curry here on our site. He might have a few good ones......

LincolnMarkVIIParts.com

http://www.LincolnMarkVIIParts.com
Bruce
WHITEOXLSC
ImageImageImageImage

1990 Regatta Blue LSC (newest addition aka Blu)
1986 Mark VII Silver LSC (sold, aka the Grey Ghost)
1990 Mark VII Oxford White LSC (new addition aka the WhiteOx)
1993 Ford Green Explorer Sport 2WD 4.0L V6 (daily driver do everything truck)(loaded first generation)
1988 Ford Blue/mostly rust brown Ranger 2.9L V6 STX P/U (Old faithful) (dead trans, 358XXX miles, sold)
1975 Oldsmobile Blue Omega Hatchback Coupe

Proudly supporting ; Pick N Pull of the greater bay area, NAPA auto parts, Ebay, Suncore Industries, Johnny Franklin mufflers, and Paul Protos electronics restoration.
User avatar
WHITEOXLSC
CLUB MEMBER
 
Posts: 1184
Joined: Sat Oct 12, 2013 12:44 pm
Location: Santa Rosa, Sonoma County (the "other" wine country) California

Re: Door panel foam replacement?

Postby Miah » Sat Mar 25, 2017 1:39 pm

Tom has some, but he's never gotten back to me after I sent him my shipping info for the final price quote. At this rate I'm really considering tweaking a T-Bird insulation panel & going on with life.
User avatar
Miah
REGISTERED USER
 
Posts: 17
Joined: Mon Feb 06, 2017 7:58 am
Location: MO, USA

Re: Door panel foam replacement?

Postby oldschool1 » Mon May 08, 2017 7:46 pm

Did you contact Tom at tacurry91845@yahoo.com ?
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8678
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: Door panel foam replacement?

Postby Miah » Mon May 08, 2017 8:55 pm

Um, yeah as I mentioned above...Tom had a set. Took awhile to get the deal sorted out since I needed a few other odds & ends which he didn't end up having, but it worked out in the end.
User avatar
Miah
REGISTERED USER
 
Posts: 17
Joined: Mon Feb 06, 2017 7:58 am
Location: MO, USA


Re: Door panel foam replacement?

Postby 90 MarkVII BB » Mon May 22, 2017 10:07 am

Why not just get a roll of 1/4" think foam and use the worn ones as a template?
"Ivory" - 1990 Mark VII Bill Blass Edition
3G Alternator, Arnott Air springs front/rear, hardwired dashcam, Tigerpaw whitewalls, all 4 brake lines new NiCopp, all else factory.
In the works - Backup cam, Addco#415.
User avatar
90 MarkVII BB
CLUB MEMBER
 
Posts: 302
Joined: Tue Aug 17, 2010 11:31 pm
Location: Bronx, NY


Return to Interiors

Who is online

Users browsing this forum: No registered users and 1 guest