Trunk Resto-Mod Project.

clutter!, stain removal, cleaning, detailing

Re: Trunk Resto-Mod Project.

Postby tomnh » Sat Jul 20, 2013 5:16 pm

The problem with LEDs is that they don't draw enough current and set off our 'Light Out' warning lights. There is a fix by adding a load unit to each bulb. Little more expensive but if that is the look you want......

Dirty Deeds 90 lsc 93 Cobra heads and intake, 1.7 RR, 6AL ignition, United Exhaust 2 1/4" off road exhaust, no smog and no cats, X-Pipe, SCT chip and mass air, A9P ECU. 24lb injectors, 3:55 gears, 255 fuel pump, aeromotive fuel pressure regulator with gauge, 65mm TB, Ram Air intake, 17" 1998 cobra rims. Last tune was 290HP

Sandy 1989 lsc convertible (1 of 12) Original and Stock, driven daily and under renovation.

Buy Club Gear and Support Our Club !
User avatar
Posts: 1888
Joined: Sat Dec 27, 2008 3:55 pm
Location: Rochester, New Hampshire

Re: Trunk Resto-Mod Project.

Postby CDW6212R » Tue Jul 23, 2013 4:49 pm

Yes, be sure to use enough resistors added into the LED circuit to keep the rest of the circuit happy.
1991 Red Special Edition, my 2nd SE, dead paint, DWS 255/45/17's on 95 Cobra wheels, and soon; DVD/Navi/backup camera, OBDII and the 347, before custom paint.
98 Mountaineer with Continental DWS 255/55/18's, big sway bars, custom brakes. Soon to be A4WD with XP8 bumpers and wing.

User avatar
Posts: 5585
Joined: Wed Feb 09, 2011 11:57 pm
Location: Near Dollywood in TN

Re: Trunk Resto-Mod Project.

Postby smartones22 » Wed Apr 12, 2017 12:12 pm

Great work!
User avatar
Posts: 14
Joined: Sun Jan 15, 2017 5:47 pm


Return to Trunk

Who is online

Users browsing this forum: No registered users and 1 guest