1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Discussion of STOCK Vehicle Identification Numbers, Certification Labels, World Manufacturer Identifiers, Check Digits, Restraint System Types, Line Series Body Types, Model Year, Exterior Paint Codes, Vinyl Bodyside Molding Codes, Interior Trim Codes, Radio Type Codes, District Codes, Axle Codes.

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Fri Nov 10, 2017 1:17 am

Wow...!
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Tue Nov 14, 2017 5:31 pm

1984 Lincoln Continental Mark VII
Antenna
Two Wire

Image
Image

Stock trunk interior trim anchors.
Image
Image
Image
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Tue Nov 14, 2017 7:04 pm

Got a part number on that antenna, Old School? I was not so fortunate in that my 84 came with an aftermarket one.
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Tue Nov 14, 2017 8:40 pm

1984 Lincoln Continental Mark VII Power Antenna Assembly part number E4LY-18850-B.
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Tue Nov 14, 2017 8:47 pm

As always... THANKS!
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois


Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Tue Nov 14, 2017 11:27 pm

Sorry but 40 years of reading and writing scripts for theatre and film have left me with a severe case of... Pinter Pause.
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Wed Nov 15, 2017 1:09 am

"The “Pinter pause” is typically found partway through a line of speech. It’s not a prolonged or pregnant pause of the kind that’s often used to draw attention to a particular moment. Rather, it’s a brief pause that’s used to reflect the natural rhythm of speech."

Gotta love ... Microsoft.
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Wed Nov 15, 2017 1:51 am

Very Good! But if we're going to discuss "Pinter Pauses" we need several hours... and more than a few Black and Tans!
Have a good one Old School!
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois


Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Wed Nov 15, 2017 11:08 am

Image
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Wed Nov 15, 2017 12:25 pm

I have yet to try using this brand of tools in my driveway. At over 90 proof, it is indeed at a higher octane rating than I'm accustomed to.
I may have to switch from a 40/60 ratio to a 30/70.
Your thoughts?
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby WHITEOXLSC » Wed Nov 15, 2017 4:14 pm

oldschool1 wrote:I have yet to try using this brand of tools in my driveway. At over 90 proof, it is indeed at a higher octane rating than I'm accustomed to.
I may have to switch from a 40/60 ratio to a 30/70.
Your thoughts?


30/70 While tinkering with the cars, 80/20 after everything is done, sounds about right :lol: :shock:
Bruce
WHITEOXLSC
ImageImageImageImage

1990 Regatta Blue LSC (newest addition aka Blu)
1986 Mark VII Silver LSC (sold, aka the Grey Ghost)
1990 Mark VII Oxford White LSC (new addition aka the WhiteOx)
1993 Ford Green Explorer Sport 2WD 4.0L V6 (daily driver do everything truck)(loaded first generation)
1988 Ford Blue/mostly rust brown Ranger 2.9L V6 STX P/U (Old faithful) (dead trans, 358XXX miles, sold)
1975 Oldsmobile Blue Omega Hatchback Coupe

Proudly supporting ; Pick N Pull of the greater bay area, NAPA auto parts, Ebay, Suncore Industries, Johnny Franklin mufflers, and Paul Protos electronics restoration.
User avatar
WHITEOXLSC
CLUB MEMBER
 
Posts: 1186
Joined: Sat Oct 12, 2013 12:44 pm
Location: Santa Rosa, Sonoma County (the "other" wine country) California

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Wed Nov 15, 2017 4:35 pm

:lol:
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Sat Nov 25, 2017 1:10 pm

Hey Old School-
My antenna arrived today... This is what 49.99 + shipping buys at nospartsltd.com...
Not exactly BRAND SHINY NEW but I think I did alright... assuming it works.
Image
Image


HAPPY THANKSGIVING WEEKEND!
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Sun Nov 26, 2017 6:13 pm

Thank you. The holiday was good.

Nice score! That is exactly what you need!
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Sun Nov 26, 2017 7:19 pm

The previous owner installed one of those black bendable aftermarket deals and cut off the original connector... Is there a particular type or part # that I have to use?
I remember you mentioning that I'd have to change connectors on the antenna regardless...
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Wed Nov 29, 2017 12:02 am

No.
The connector is only there as an installation convenience.
The two wires (red and green) can be spliced into the existing two wires supplying the current power antenna.
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby Panamerica » Wed Nov 29, 2017 12:01 pm

Oh... Very good!
Thanks and Happy Holidays to You and Yours!
1990 Bill Blass; 1984 Base Model; 1981 Ford Courier Pickup
User avatar
Panamerica
CLUB MEMBER
 
Posts: 125
Joined: Fri Jan 04, 2013 1:58 am
Location: Chicago, Illinois

Re: 1MRBP98F7EY629021 1984 LINCOLN CONTINENTAL MARK VII

Postby oldschool1 » Fri Dec 01, 2017 4:00 am

You are welcome and the same to you and your's.
User avatar
oldschool1
CLUB MEMBER
 
Posts: 8689
Joined: Fri Dec 26, 2008 10:01 pm
Location: Primos, Pennsylvania USA

Previous

Return to Identification

Who is online

Users browsing this forum: No registered users and 1 guest